DX80
(The system controller will be rectangular, beige, and plastic.)
Note: back, next, show, chg, bksp and save are LCD interactive button operations.
Use the three buttons below the LCD display to make changes.
From any phone:
Enter Database Administration using the feature code FEATURE # *
Then enter the DB Admin password # # # # # # # # (this is the password)
Press the interactive button underneath SHOW. The DB item Select screen displays.
Press the volume up or down bar to return to the DB item Select screen at any time.
Input 08-14, then press save. This advances to the System Time programming screen.
Press NEXT to advance to the next system clock item that requires changes.
Press CHG and input data as required
Follow this method for each of the database items for the system clock.
Press HOLD button to exit System Time programming & return to the previous menu level & exit the programming mode.
FXII or DXP (from any telephone)
(The system controller will be a square box, either black or gray, sticking out from the wall about a foot.)
Press INTERCOM
Dial * # 0 * 0 1.
Dial two digits for month.
Dial two digits for day.
Dial two digits for year.
Dial two digits for hour (military time)
Dial two digits for minute.
Dial # to save.
Press SPEAKER to quit
DSUII
(The system controller will be kind of flat, with an area that projects out at the top. Black or gray.)
From extension 10 or 12- Press Intercom and dial * # 0 1
Enter in the date& time using military format: YY/MM/DD - HH/MM (military)
